Dosatron Water Powered Doser 14 GPM 1:3000 to 1:333 - 3/4 in [D14MZ3000VFBPHY]

Dosatron Water Powered Doser 14 GPM 1:3000 to 1:333 for 3/4-inch systems (D14MZ3000VFBPHY) uses water pressure power. The water pressure activates the nutrient doser and mixes nutrient concentrate with the correct amount of water then pushes the nutrient solution through to the crops. The Water Powered Doser is installed directly on the water supply line and accommodates a flow rate of up to 0.05 to 14 gallons of water per minute (GPM) at a pressure range of 4.3 to 85 PSI. The injection range for the Dosatron Water Powered Doser 14 GPM 3/4" is 1:3000 to 1:333 (0.03 to 0.3%). This product includes a mounting bracket, suction hose, bypass, union, weighted strainer, and quick start guide.

Dosatron Water Powered Doser 14 GPM 1:3000 to 1:333 Instructions

Dosatron Water Powered Doser 14 GPM 1:3000 to 1:333 Specifications

Dosatron Conversion Guide

Dosatron System Overview

Simplify your nutrients with the D14 Series

The Dosatron D14 Series is perfect for the indoor grower. There are many different variations of the D14 to choose from and knowing the differences for your specific needs is critical!

14 GPM is the max flow rate for the D14 series

Available options: (Seal & Diltuion/Injection Range)

• D14MZ2VFBPHY - Viton Seal - 1:500 to 1:50
• D14MZ10VFBPHY - Viton Seal - 1:100 to 1:10
• D14MZ3000VFBPHY - Viton Seal - 1:3000 to 1:333
• D14MZ3000VFBPIIK - Kalrez Seal - 1:3000 to 1:333

*Additional D14 injectors coming soon

Selecting your Dosatron Injector

Seal Options

• Viton Seals

  Generally used for products with neutral to acidic pH. Ex: fertilizers, pesticides, acids (pH correction), supplements, surfactants

• Aflas Seals

  Generally used for products with a higher than neutral to alkaline pH. Ex: pH up products, calcium hydroxide (liquid lime), calcium carbonate, potassium carbonate

• Kalrez Seals

  Used specifically for Peracetic acid (also known as peroxyacetic acid, or PAA) products. Ex: ZeroTol, SaniDate, etc.

Dosatron Model Name Definitions.

There are several Dosatron Dosers with similar models numbers that vary by only 1 or 2 letters. BE SURE to make a selection based on your exact needs!

Units with HY in the name are specifically meant for the Dosatron NDS - Nutrient Delivery System. Units with "HY" in the model number include a SCH 80 Threaded Union to connect the injector to the other injectors/kits in-line.

Units with BY have a Bypasss option essentially taking the specific doser out of operation. Once the Bypass switch is flipped, the dosers stops the ram pump from pulling chemicals into the water line.

How the Water Powered Doser works

Dosatron water-powered, non-electric chemical injectors are the easiest, most reliable way to accurately inject chemicals into water lines. Dosatron injectors work using volumetric proportioning, ensuring that the chemical mixture remains the same regardless of variations in pressure and flow.

When water enters the injector, it triggers the hydraulic motor, which begins moving up and down inside the body of the injector.

On the upstroke, the Dosatron draws fluid up from the concentrate tank in an action similar to a hypodermic syringe.

On the down stroke, the concentrate is displaced into the mixing chamber, where it is mixed with the water flowing through the unit. Then the water-and-chemical mixture is discharged into the water lines.

1. Water Flow
2. Water enters the Dosatron body
3. Concentrate is pulled up into the Dosatron
4. Concentrate mixes with the incoming water
5. Blended solution is discharged into the water line

*Doser in example may look different from your actually doser

Specifications for the D14 Series